<H2><A name="intro">Introduction to Service Pack 1</A></H2>
</TD>
<TD align="right"><SPAN CLASS="webonly"><A class="finePrint" HREF="#top">Back to Top</A></SPAN></TD>
</TR></TBODY></TABLE>
<HR>
<P>Microsoft® Virtual PC 2004 Service Pack 1 (SP1) contains the latest software updates for Microsoft Virtual PC 2004. To make sure that you understand these updates and their effects, review all of the information in this document before you install SP1. </P>
<P CLASS="important">Important</P>
<UL>
<LI>
Information in this document might differ from some of the information that appears in the Virtual PC Help or Getting Started. If you find such differences, consider the information in this document to be correct.</LI>
<TD align="right"><SPAN CLASS="webonly"><A class="finePrint" HREF="#top">Back to Top</A></SPAN></TD>
</TR></TBODY></TABLE>
<HR>
<UL>
<LI>SP1 updates Virtual PC so that Microsoft Windows Server™ 2003, Standard Edition is a supported host.</LI>
<LI>The readme.htm file that is included on the Virtual PC 2004 product CD contains a spelling error. In the section, "MYVIRTUALMACHINES Environment Variable," "MYVIRTUALMACINES" is misspelled. It should be spelled: MYVIRTUALMACHINES.
</LI>
<LI>SP1 includes software updates for the Installation Wizard. After you install SP1, do not use information about the Installation Wizard or command-line installations that appears in the Virtual PC Help or Getting Started. For more information about command-line installations, see the following section, "Installing Virtual PC SP1 from the Command Line."</LI>
</UL>
<P CLASS="important">Important</P>
<UL>
<LI>You must shut down or turn off all guest operating systems before installing SP1. This ensures that there are no virtual machines in a saved state. This is important because saved states are not compatible between SP1 and all previous versions of Virtual PC 2004.</LI>
<H2><A name="cmd">Installing Virtual PC SP1 from the Command Line</A></H2>
</TD>
<TD align="right"><SPAN CLASS="webonly"><A class="finePrint" HREF="#top">Back to Top</A></SPAN></TD>
</TR></TBODY></TABLE>
<HR>
<P>If you want to install SP1 from the command line, you can do so by using <NOLOC><b>Msiexec.exe</b></NOLOC>. For more information about <NOLOC><b>Msiexec.exe</b></NOLOC>, see the <A ID="MSUrl" HREF="http://go.microsoft.com/fwlink/?LinkId=26682" TITLE="http://www.microsoft.com/" TARGET="_blank">Microsoft Web site</A><SPAN CLASS="printOnly">(http://www.microsoft.com/)</SPAN>.</P>
<dd>Installs Virtual PC SP1. You can use <NOLOC><b>/x</b></NOLOC> to uninstall Virtual PC SP1.</dd>
<NOLOC><dt><b>/a</b></dt></NOLOC>
<dd>Applies the administrative installation option. Installs Virtual PC SP1 on the network.</dd>
<NOLOC><dt><b>/q</b></dt></NOLOC>
<dd><p>Sets the user interface level as shown in the following table.</p>
<TABLE WIDTH="95%">
<TR>
<TH>Value</TH>
<TH>Action</TH>
</TR>
<TR>
<TD><NOLOC><b>q</b></NOLOC> or <NOLOC><b>qn</b></NOLOC></TD>
<TD>No user interface</TD>
</TR>
<TR>
<TD><NOLOC><b>qb</b></NOLOC></TD>
<TD>Basic user interface</TD>
</TR>
<TR>
<TD><NOLOC><b>qr</b></NOLOC></TD>
<TD>Reduced user interface</TD>
</TR>
<TR>
<TD><NOLOC><b>qf</b></NOLOC></TD>
<TD>Full user interface</TD>
</TR>
</TABLE>
<p>For more information about the user interface levels, see the <A ID="MSUrl" HREF="http://go.microsoft.com/fwlink/?LinkId=26682" TITLE="http://www.microsoft.com/" TARGET="_blank">Microsoft Web site</A><SPAN CLASS="printOnly">(http://www.microsoft.com/)</SPAN>. </p>
<dd>Specifies where to install the Virtual PC SP1 installation package when you are using the administrative installation (<NOLOC><b>/a</b></NOLOC>) option. The package's data files are uncompressed in this location.</dd>
<dd>Determines what users see in the Start menu and in Add or Remove Programs. If <NOLOC><b>ALLUSERS</b></NOLOC> is not set, the installer does a per-machine installation. If <NOLOC><b>ALLUSERS</b></NOLOC> is set to an empty string (<NOLOC><b>ALLUSERS=""</b></NOLOC>), the installer does a per-user installation. In all cases, the installer uses folders in the "All Users" profile. </dd>
</dl>
<h2>Example</h2>
<p>The following example shows how to perform an unattended installation and make the program accessible to all users on the computer. During an unattended installation, the Setup program runs without prompting you for input.</p>
<NOLOC><p><b>Msiexec.exe /i "Microsoft Virtual PC 2004.msi" PIDKEY=</b><i>PID key number</i> <b>/qn</b></p></NOLOC>
<p>If you want to use Group Policy to deploy Virtual PC SP1, you must use the administrative installation option (<NOLOC><b>/a</b></NOLOC>) along with the <NOLOC><b>TARGETDIR</b></NOLOC> option. This is shown in the following example:</p>
<p>The following table provides a formatting legend for the command-line information.</p>
<TABLE WIDTH="95%"><TR><TH>Format</TH><TH>Meaning</TH></TR><TR><TD><i>Italic</i></TD><TD>Information that the user must supply</TD></TR><TR><TD><b>Bold</b></TD><TD>Elements that the user must type exactly as shown</TD></TR><TR><TD>Ellipsis (...)</TD><TD>Parameter that can be repeated several times in a command line</TD></TR><TR><TD>Between brackets ([])</TD><TD>Optional items</TD></TR><TR><TD>Between braces ({}); choices separated by pipe (|). Example: {even|odd}</TD><TD>Set of choices from which the user must choose only one</TD></TR><TR><TD><PRE><CODE>Courier font</CODE></pre></TD><TD>Code or program output</TD></TR></TABLE>
<H2><A name="precompact">Virtual Disk Precompactor</A></H2>
</TD>
<TD align="right"><SPAN CLASS="webonly"><A class="finePrint" HREF="#top">Back to Top</A></SPAN></TD>
</TR></TBODY></TABLE>
<HR>
<P>SP1 includes Virtual Disk Precompactor, a utility that is designed to "zero out"—that is, overwrite with zeros—any available blank space on a virtual hard disk. </P>
<P>We recommend that you use Virtual Disk Precompactor before you compact a dynamically expanding virtual hard disk. Using Virtual Disk Precompactor should result in a smaller compacted virtual hard disk.
After you install SP1, Virtual Disk Precompactor.iso is located in the folder: \Program Files\Microsoft Virtual PC\Virtual Machine Additions\.</P>
<P>To use Virtual Disk Precompactor, you must first capture Virtual Disk Precompactor.iso. To do so, use the standard procedure for capturing .iso files. For more information about this procedure, see "To capture or release a CD or DVD" in the Virtual PC Help.</P>
<P>After you capture Virtual Disk Precompactor.iso, you can run Virtual Disk Precompactor by going to the CD drive of the virtual machine. To view Help for Virtual Disk Precompactor, type <b>precompact -help</b>. To run Virtual Disk Precompactor, type <b>precompact</b>.</P>
<H2><A name="qfekb">Updated Network Adapter Driver for Windows NT Workstation 4.0</A></H2>
</TD>
<TD align="right"><SPAN CLASS="webonly"><A class="finePrint" HREF="#top">Back to Top</A></SPAN></TD>
</TR></TBODY></TABLE>
<HR>
<P>Virtual PC emulates the DEC 21140A network adapter, which is a multifunction Peripheral Component Interconnect (PCI) card. A PCI card that supports more than a single network interface is known as a multifunction card. For a single network interface, only Function 0 is exposed. For two network interfaces, Function 0 and Function 1 are both exposed on the same virtual PCI card. Exposing Functions 2 and 3 enables the third and fourth network interfaces.</P>
<P>Microsoft Windows NT® Workstation 4.0 is compatible with multifunction cards, including the DEC 21140A network adapter. However, the .inf file that is included with Windows NT Workstation 4.0, and which configures registry entries, enables the adapter to use only the first function (Function 0). Because of this limitation, the driver for the DEC 21140A network adapter included with Windows NT Workstation 4.0 can only use the first network adapter configured in a virtual machine that was created by Virtual PC.</P>
<P>SP1 includes a virtual floppy disk, NT4 Network Driver.vfd, that contains an updated driver for the DEC 21140A network adapter. The .vfd file is located in the folder: \Program Files\Microsoft Virtual PC\Virtual Machine Additions.</p>
<p>You must install the updated driver to enable multifunction support and allow a Windows NT Workstation 4.0 guest operating system to use more than one network adapter.</p>
<P CLASS="proclabel">To add the NT4 Network Driver.vfd to your virtual machine</P>
<OL>
<LI>Log on to the virtual machine by using an account that has administrative credentials on the guest operating system. </LI>
<LI>Click <b>Start</b>, click <b>Settings</b>, and then click <b>Control Panel</b>. </LI>
<LI>Double-click <b>Network</b>, and then click the <b>Adapters</b> tab. </LI>
<LI>If there is an existing DEC PCI Fast Ethernet Adapter, click <b>Remove</b> to remove it, and then click <b>Close</b>.</LI>
<LI>After you click <b>Close</b>, you are prompted to shut down and restart. </LI>
<P CLASS="important">Important</P>
<ul>
<LI>When you remove an adapter in Windows NT Workstation 4.0, you must restart the operating system before you add the updated adapter driver.
</LI>
</uL>
</OL>
<P class="proclabel">To add the updated adapter driver</P>
<OL>
<LI>After Windows NT Workstation 4.0 restarts, click <b>Start</b>, and then click <b>Control Panel</b>. </LI>
<LI>Double-click <b>Network</b>, and then click the <b>Adapters</b> tab. </LI>
<LI>Click <b>Add</b>, and then click <b>Have Disk</b>. </LI>
<LI>Click <b>OK</b> to use the default path of the A drive. </LI>
<LI>Click <b>OK</b> to use the DEC PCI Fast Ethernet DECchip 21140, which is the only option available. </LI>
<LI>When you are prompted to choose a connection type, click <b>OK</b> to use AutoSense, which is the default. </LI>
<LI>When you see the message "A network card of this type is already installed in the system. Do you want to continue?" click <b>OK</b>. </LI>
<LI>Repeat the steps until you have added as many instances of the DEC PCI Fast Ethernet DECchip 21140 as the number of network adapters you want to use. Virtual PC supports up to four network adapters per virtual machine. </LI>
</OL>
<p>After you have completed this procedure, use the following procedure to change the internal network number.</p>
<P CLASS="proclabel">To change the internal network number</P>
<OL>
<LI>When you are done adding network adapters, click <b>Close</b>.</LI>
<LI>If you see the message "Your network configuration has multiple adapters. The default internal network number is 0 and needs to be a unique number. Do you want to change this now?" click <b>Yes</b>. </LI>
<LI>Change the internal network number value from "00000000" to "00000001," and then click <b>OK</b>. </LI>
<LI>When you are prompted for TCP/IP information for each new network adapter, you can type a specific IP address or obtain an IP address from a DHCP server. </LI>
<LI>After you configure each new network adapter, you are prompted to restart the operating system. To use an adapter that you have added in Windows NT Workstation 4.0, you must restart your operating system. </LI>
<H2><A name="emm386">Software Update for Shared Folders Under<br> <nobr>MS-DOS</nobr> 6.22</A></H2>
</TD>
<TD align="right"><SPAN CLASS="webonly"><A class="finePrint" HREF="#top">Back to Top</A></SPAN></TD>
</TR></TBODY></TABLE>
<HR>
<P>Prior to SP1, the Shared Folders setting in Virtual PC was turned off by default under <nobr>MS-DOS</nobr> 6.22 if EMM386 was loaded. To support Shared Folders under <nobr>MS-DOS</nobr> 6.22 if EMM386 is loaded, SP1 includes a new file, Vmadd386.sys. This file is located in the folder: C:\Vmadd\.</P>
<P>For Shared Folders to work under <nobr>MS-DOS</nobr> 6.22 when EMM386 is loaded, the Config.sys file must include the following line before EMM386 or any other extended memory managers:</p>
<p>Device=C:\Vmadd\Vmadd386.sys</p>
<P>Vmadd386.sys must also be loaded if you intend to use Shared Folders under Microsoft Windows® 3.11.</P>
<TD align="right"><SPAN CLASS="webonly"><A class="finePrint" HREF="#top">Back to Top</A></SPAN></TD>
</TR></TBODY></TABLE>
<HR>
<p>SP1 includes the following additional software updates.</p>
<UL>
<LI>Updated version of Virtual Machine Additions. You should update the version of Virtual Machine Additions on all virtual machines where Virtual Machine Additions is installed. For more information, see "Installing Virtual Machine Additions" in Virtual PC Help.</LI>
<LI>Update to support TCP segmentation offloading. Prior to SP1, if TCP Segmentation Offloading was activated, some virtual networking features would not function correctly. With SP1, if your physical network adapter supports TCP segmentation offloading, you can activate TCP segmentation offloading, and virtual networking will function correctly.</LI>
<LI>Update to support Group Policy Software Installation. For more information about Group Policy Software Installation, see Help and Support Center in your Microsoft Windows Server 2003 operating system.</LI>
<LI>Update to change the default performance option from <b>Give processes on the host system priority</b> to <b>Run Virtual PC at maximum speed</b>. </LI>
<LI>Updates to improve the performance of Microsoft Windows XP Service Pack 2.</LI>
<LI>Update to allow the name of the host computer and the virtual machine name to be read from within the guest operating system. This functionality is used by server management software, such as Microsoft Systems Management Server 2003.</LI>
<LI>The hotfix described in article <A ID="MSUrl" HREF="http://go.microsoft.com/fwlink/?LinkID=32826" TITLE="http://www.microsoft.com/" TARGET="_blank">833506</A>, which describes how Virtual PC 2004 may stop responding when a virtual machine is started, in the Microsoft Knowledge Base. </LI>
<TD align="right"><SPAN CLASS="webonly"><A class="finePrint" HREF="#top">Back to Top</A></SPAN></TD>
</TR></TBODY></TABLE>
<HR>
<p>Information in this document, including URL and other Internet Web site references, is subject to change without notice. Unless otherwise noted, the example companies, organizations, products, domain names, e-mail addresses, logos, people, places, and events depicted herein are fictitious, and no association with any real company, organization, product, domain name, e-mail address, logo, person, place, or event is intended or should be inferred. Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written permission of Microsoft Corporation.</p>
<p>Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. Except as expressly provided in any written license agreement from Microsoft, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property.</p>
<p>Microsoft, <NOBR>MS-DOS</NOBR>, Windows, Windows NT, and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.</p>
<p>The names of actual companies and products mentioned herein may be the trademarks of their respective owners.</p>
